With its beautiful Brushed nickel finish, 4-light kit with white linen glass and 5 carved, reversible rosewood/bleached cherry blades, the Hampton Bay Carriage House Brushed Nickel Ceiling Fan adds traditional style to any room decor.
The Carriage House ceiling fan also has a triple capacitor for quiet fan operation. Uses four 60-Watt incandescent bulbs (included).
It hugs the ceiling closely with its ceiling mount and suits most home decor situations.
With its reversible blades, you get to choose whether you would like the rosewood look or the bleached cherry look. So versatile and yet elegant.
Here are some of the specifications:
- 5 reversible rosewood/bleached cherry blades make it easy to change your decor style without purchasing a new fan
- 3-speed reversible function for year-round comfort and saving
- 4-light kit with white linen glass
- Uses four 60-Watt incandescent bulbs (included)
- Updated traditional hugger design in brushed nickel
- Designed for rooms 12 ft. x 12 ft. to 18 ft. x 18 ft.
- Accu-arm blade system for fast installation
- Limited lifetime motor warranty
- 54 in. lead wires
This elegant ceiling fan comes in three finishes for you to choose from – polished brass, iron, and brushed nickel.
With an airflow of 4,072 Cubic Feet per Minute (CFM) it will suit any room that is large up to a size of 18 feet x 18 feet.
This ceiling fan does not come with any remote, however, you can buy one that will work fine with it.
Can the Lights Be Dimmed By an Independent Dimmer Switch?
Yes, they can be since the fan has a separate wire for the fan speed and for the fan light. The ceiling fans light wire can be connected to a separate dimming switch.
However, you are going to need a compatible dimmer for LEDs, since this ceiling light kit comes standard with LED bulbs.
Since standard dimmers for the incandescent light bulbs work by reducing the voltage to the light bulbs to make them appear less bright, and LEDs just will not work at the lower voltage, and this is even if they’re dimmable.
With a LED they are either off or on. The dimmers for the LED bulbs work by reducing the frequency of the electric pulse going to the LEDs and they are solid-state.
So you are going to need to install one of these LED dimmers inside your wall switch. After this, you are going to need to separate out the light circuit from the ceiling fans motor circuit. Then you would run the wires from the light circuit, through the ceiling and along to the dimmer switch.
However, as you can imagine it’s do-able, but the big crunch is that its probably not going to be worth the aggravation and time in my own opinion. A qualified electrician should be able to do the job, but would probably cost more than this Carriage House ceiling fan!
Hampton Bay Carriage House 52in Ceiling Fan Manual
For the Hampton Bay Carriage House 52in Ceiling Fan Manual please click here.
Please check out our other Hampton Bay Ceiling Fan Manuals.